LiZong Dental Lab Polishing Lathe Labortory Polisher 3000RPM 550W

LiZong Dental Lab Polishing Lathe Labortory Polisher 3000RPM 550W

550W The Polishing Lathe is used to polish various kinds of metal(Ni-CrAlloy,Cr-CoAlloy,and stainless steel),plastic dentures,dental braces and porcelain teeth. The housingis made of extra-hard materials. It is a necessary equipment for all dentists.

Specifications:
Voltage:220v/50hz±10%
Power:550W
Rotational speed:3000rpm
Weight:26kg
Dimensions:50x20x25cm;

Instructions:
The machine should be used under 1,000 M altitude,between the temperature of 15°c and 40°c, and under the humidity of 95%.
Before using the machine, please check if the accessories are damaged during transportation.
Before using the machine,please use your hands to ture the axis of the grinding wheel, and it should be smooth, if not, the problem should be solved before operating.

Notice:
Please use this machine under the right voltage and frequency.
The housing of the lathe should have a good grounding
Please do not use this machine in the room filled with the gas which might cause fire or explosion.
Do not take off the safety case.
Please do not use this machine outdoors.
Please do not spill water onto the machine while it is working.
The direction of which this machine rotates should be the same as the direction written on the instruction sheet.
User should wear goggles while operating
To avoid being hurt by the pieces coming off the work piece, please do not push the work piece violently onto the grinding wheel.
To avoid hurting other people by turning on the machine accidentally,please turn off the machine and cut the power after using.

Contact Information:
Live Support: Chat with us online
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?