Technical Specification:
1. Tube Power: 30W / 55W
2. Number of tubes: Four (4)
3. Application area: 60 m²
4. Voltage: 220V±10%, Frequency: 50Hz±10%
5. Input power: 180VA
6. UV Wavelength: 253.7nm
7. UV illumination: ≥428 µW/cm²
8. Can be operated with 2 or 4 lamps by pressing Lamp 1 or Lamp 2 button
9. Lamps have side compartments for storage
10. Angle of the lamp arms can be adjusted from 30–180°
11. Timer can be set from 15 mins to 1440 mins
12. Infrared sensor: If motion is detected during operation, the light gives an alarm and turns off automatically.
Usage Instruction:
1. Please clean the room before using the UV room device.
2. Place the unit in the center of the room or where UV light can reach more surfaces.
3. Arrange items to be exposed to UV light. Place frequently touched items closer to the unit.
4. Plug in and set the timer. The system has a 15-second delay upon timer setting.
5. UV lamp will pause if motion is detected. It resumes when the area is clear.
6. "Lamp 1" controls 2 lamps; "Lamp 2" controls the other 2 lamps.
7. Open the window after use to let the smell out.
8. Wipe the lamps with a dry cloth after use.
Warning:
1. Please protect eyes and skin during operation.
2. Operate according to the operating manual.
3. Replace the lamp when UV illumination is less than 70% or after 2000 hours of working.