More than $100 free shipping      One Year Quality Guarantee      90-day money-back guarantee

  • Tianjie® BLX-9 Oral X-Ray Machine Low Rechargeable

  • Item No. G18168059 5 stars, 2 reviews
  • Brand:Alan Dental
  • But It Now :  $861.99 Options : Quantity :

    Following the purchase of goods to reach the number that they can enjoy a range of preferential prices
    Large Order :
  • Weight:0gram
  • Goods click count:1342
Item Description Reviews

Tianjie Oral X-Ray Machine BLX-9 Low Rechargeable


1. The tube voltage frequency of this machine is 30 KHz, and the tube current is 0.2 MA. The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead. 
2. Toshiba 0.3mm x 0.3mm micro-focus tube
3. No protective operation room is needed when installing the complete machine
4. Flexible adjustment of position and angle of handpiece
5. Compact in volume, light in weight, convenient for carrying
6.Time is adjustable, high contrast of picture, imaging in focus
7. There are vacuum components and high-pressure parts inside of the machine, so for your safety and the maintenance of the machine
8. The tube head is equipped with excellent radiation-shield protection (except the radial mouth, and tests have shown that the radial index is zero. Safety is guaranteed.
9. Non-film inspection and storage can be realized when corresponding to a sensor

Voltage: 110v±10% and 220V±10% 
Power: 24V 8000MA 
Charger: 220V/110V, 50Hz
Tube current: 0.1mA
Rating: 60W
Frequency: 30 Hz
Exposure time: 1-9 seconds optional
Leak radiation: < 20μgy/h(12lb)
Focus Skin Distance: >20cm
Tube voltage: 70KV
Relative Humidity(RH) < 80%
Storage conditions: 5-40 degrees Celsius, relative Humidity
Net weight: 6.5 kg

Packing With

Main Unit x 1(Aluminum Case)
Dental Film Position x 1
Charger x 1
Dental Films for Test x 5
English Manual x 1
Warranty Card x 1

Operation of the Main Unit
1. Upon receiving, open the box and check the product for possible damage during shipping. 
2. Make sure the fittings on the encasement list are packaged within the box.
3. Connect the six-core cable (of the Main Unit) to the joint of the ball head and tighten the screw
4. After the Main Unit and ball head are perfectly fit together, plug in the international standard electrical source, grounding is strongly recommended. 
5. Turn on the Power; the pilot lamp will be light up.During this time, the digital tube of the main unit will show the fore setting time. Now the equipment is in standby mode.
6. Setting the time (Skip to next step if unneeded) Use the "SET", "+", and" -" buttons to reset the time as follows: press SET, the pilot lamp above is illuminated, the machine is now in the time setting mode→then press "+" and" -" to set the time needed (time range is 0.5-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is now in standby mode. 
7. Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the smooth side stick to the tooth)
8. Keep the ball head plumb to the tooth projection position; Have the ball head, tooth, and tooth film steadily mutually plumb. 
9. After positioning, use theEXP on the main Unit, the remote controller, or the button on the touch head tube to take pictures. The three methods have the same effect. (Notice: gently press)
10. After exposure to the tube, release the start button again (available in three ways) in case of an emergency to stop shooting and return to standby status. (At this point there was no output ray, so the dental films can be used again). 
Repeat step 6 to reset the picturing time.To repeat the picturing process, please repeat steps 7 to 9. 
11. Turn the power of the main unit off when the work is finished, press POWER, making sure the pilot lamp is off. Don't keep the main unit long in standby mode.

Points for Attention
1. Make sure the angle of film, tooth, and ball head are properly aligned when taking a picture. Keep them steady until the last step of picturing; making sure that there is no change in any of their positions.
2. Remember to turn the power offwhen work is done.
3. Change the battery if the remote controller loses its functioning or if the remote's distance is shorted.
4. After turning the power on, wait one minute before taking pictures, this allows the ray to provide a steady output.
5. The equipment switches into protection mode automatically when the voltage is incorrect. If this occurs, it will not be able to carry out the normal work of filming.
6. When taking pictures, the EXP button could stop the objection and then the machine goes back to the preparation mode.
7. Use high quality tooth film and developing liquid to make clear pictures.
8. Handle the ball head gently while in use, so as not to damage the delicate component. 
9. We usually set the time between 3-8 seconds when taking pictures, but the actual time of ray output is 0.2-0.5 seconds.
10. If a situation occurs, preventing the machine from taking regular pictures, contact the seller to solve the problem instead of trying to service the product yourself. 
11. Keep the tooth film and the liquid in a proper place and use them within the shelf-life period. 
12. Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality. 
13. Other requests accordance with the scope of the technical parameters.
14. Please read the manual carefully before using.








Contact Information:
Live Support: Chat with us online
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?

Prev: Dentist Air Polisher 5 Pcs Air Prophy Replacement Tips
Next: Floor JYF-10D Dental X-ray Unit
Buy more related dental equipment and Save more!
    • Digital Low Dose Portable X Ray Machine
    • Quick clinical inspection. Dynamic tremble removal. High frequency and low dose control . Lithium battery available. Intefrative medical platform. Hand-held convenient and fast inspection.   More Details »
    • Price:$1312.99


      Quantity : 

      Add To Cart
    • Greeloy® GU-P204 Portable Unit + YUSENDENT® Handpiece Kit + Air Scaler
    • Consists of related operation system inside the dental treatment unit, such as air supply system, water supply system, suction and drainage.
      Easy to set up and operate. Install the parts correctly and with correct power supply, control the unit with foot switch.
      High quality motor with steady performance,solid box to ensure anti-fall, service time exceeds 20,000 hours.
      Oil free motor without any lubricated oil, drainage bottle is convenient to remove and disinfect.
         More Details »
    • Price:$1121.99


      Quantity : 

      Add To Cart
Latest Dental News
View History[clear]