Lizong LZZD-180 Dental Vibrator Oscillator Shaker Plaster Vibrating 150W
Technical Specifications
Power Supply Voltage:220V 50Hz / 110V 60Hz
Maximum Amplitude:≥0.15mm
Adjustment Mode:Stepless adjustable
Power:150W
Operating Instructions
1, Connect the power cord to the power socket.
2, Turn the knob clockwise, and the oscillator will operate with gradually increasing vibration amplitude. Place the model on the vibrating table to start the model pouring process.
3, After pouring is completed, turn the knob fully to the left to shut down the device.
4, Unplug the device if it will not be used for a long time.
Precautions
1, Do not allow water to enter the inside of the machine.
2, The continuous working time of the device shall not exceed 20 minutes.
3, If the knob is loose, tighten the fastening screw on the knob with a screwdriver.
Contact Information:
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.
Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.
How to Buy from Alandental?
Prev: Dental Endo File Removal System Root Canal Broken File Extractor
Next: X-Ray Film Reader / Dental X-Ray Film Illuminator Light Box VX-100