Dental Self Cure Temporary Crown And Bridges Resin A1 / A2 / A3 with 10pcs Mix Tips

Features:

Low heat reaction with reduced irritation to the pulp.

Compressive strength and flexural strength; polishable.

Sealed edges.

Viscosity for application.

Technical Specifications:

Working Time: >1 min 30 s

Resin curing time: <10 min

Package Contents:

Specifications: 75 g

Color: A1, A2, A3

Mix Tips: 10 pcs

How to Use

1. Preparation

Take an impression using alginate, silicone, or thermoplastic material before the procedure.

Confirm the teeth are dry and manage undercuts.

Lightly lubricate the cores and surrounding tissue using petroleum jelly or a separating medium.

2. Material Dispensing

Select the appropriate Temporary Crown & Bridge Material shade and insert the cartridge into the Automix Dispenser.

Dispense the material into the impression or onto the vacuum-formed stent, covering the occlusal surfaces and filling up to the gingival areas.

3. Placement

Place the impression or stent filled with temporary material onto the prepared teeth within 1 minute 30 seconds of mixing, applying moderate pressure.

4. Removal

Remove the provisional from the mouth during the elastic phase, which is 2 to 3 minutes after mixing.

5. Finishing

Check the fit after about 7 to 8 minutes and adjust as needed, then polish the surface.

6. Final Steps

Clean, dry, and remove any separating medium from the core.

Attach the provisional crown or bridge.

Contact Information:
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?