Tealth 1020CH-127 45 Degree 1:2.7 Multiplier Contra-angle Handpiece

Tealth 1020CH-127 45 Degree 1:2.7 Multiplier Contra-angle Handpiece

Features:

1. Drive ratio: 1:3.6, with accelerator

2. Water/air hose, with water spray function

3. 45° design, suitable for tooth extraction procedures

4. Can be used for crown grooving, tooth processing, cavity repair, and crown preparation

Specification:

1. Driving ratio: 1:3.6 , speed increaser

2. Dater/air tube , water spray

3. 45° design, using for pulling compacted teeth operation.

4. Slitting of cap crown, processing of teeth,cavities and crwon preprations,

5. Max rotation speed: 200000r/min

6. Bur applicable: 16mm

Instruction:

After each treatment,Sterilizing handpiece in autoclave according to the following steps:

1. Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.

2. Lubricate handpiece, each times drop two drops inside of air inlet pipe.

3. Place into autoclaving pouch and mark.

4. Autoclave the handpiece for 12 min. at 135℃.

Contact Information:
Live Support: Chat with us online
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?