KT Dental Steam Autoclave Sterilizer Fast Casette Pressure 1.8L Sterilizer

KT Dental Steam Autoclave Sterilizer Fast Casette Pressure 1.8L Sterilizer

Features

1. Applications: sterilization for small medical appliances used in dental clinic departments.

2. The shortest sterilization cycle takes 6–7 minutes.

3. Three press buttons for different sterilization programs. Time and temperature can be set according to user needs.

4. If the water quality does not meet the required standard or there is a water shortage, an alarm signal is given and flashes on the display. The sterilization cycle stops for low temperature or low pressure during the sterilization process, and faults are displayed and can be printed.

Specifications

Dimensions: 620*415*170 mm (L x W x H)

Cassette external size: 390 x 196 x 40 mm (L x W x H)

Cassette internal size: 280 x 180 x 38 mm (L x W x H)

Reservoir volume: 3.4 L

Chamber volumn: 1.8L

Max temperature: 138 ℃

Working temperature: 121 to 135 ℃ (selectable)

Water using: distilled water, pure water

Electrical rating: 110VAC±10%, 60Hz, 12A

Net Weight: 29 kg

Gross Weight:41kg

Printer: thermal type

Paper roll: width 57 mm, roll diameter 48 mm, approx. 180 cycles per roll

Print speed: 5 mm/s

Using a cassette

1. Caution, hot surface! While removing and opening the cassette after a sterilization cycle, please keep off the potential steam inside the cassette.

2. When not in use, don’t fully insert the cassette into the unit, leave a gap about 2 or 3 cm. Otherwise the unit is ready for running, the solenoid valve will be always powered ON.

3. A sudden and forcible pushing of the cassette into the unit may damage the components inside.

Maintenance

1. Daily: Wash the interior and the exterior of the cassette with chorine free detergent, then rinse thoroughly with the distilled water.

2. Weekly: Check the biological air filter. If dirty, replace it. If wet, refer to Errors and error remedy.

3. Replace the biological air filter every 6 months.

4. Every 6 months: Check the cassette seal. Or replace the seal every 6 months.

5. An annual calibration of the unit: It depends on the user’s demand.

Contact Information:
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?