1Pcs Dental 98*12 mm HT Zirconia Ceramic Blocks for Open Wieland CAD/CAM Milling System

1Pcs Dental 98*12 mm HT Zirconia Ceramic Blocks for Open Wieland CAD/CAM Milling System

We offer wieland zeno cad cam compatible zirconia discs. Our discs are also full compatible with other types of cad/cam milling machine such as Wieland Zeno, Roland, Origin, Yena, Imes-icore, Shera and VHF etc. High translucent and super translucent zirconia are available. Super translucent or prettau compatible zirconia are for full contour crown and bridges; light transmittance higher than 40%. High translucent zirconia are for common coping and bridge; light transmittance higher than 30%.

Features:
1. Blocks have the edge groves required for a wieland or open cad cam milling machine.
2. Available in a variety of thicknesses between 10 and 25 mm.
3. Shrinkage factor:Carefully determined and put on dics at each production batch.
4. First grade fine zirconia powder
5. Made under cold isostatic pressing and machine which gives a more uniform fit lifetime.
6. High translucency and high mechanical strength, reliable stability; Suitable for crowns & bridge, and anterior & posterior denture.

Firing Instruction Firing time:
12hr Total FIRING CHART :
RT to 300 degrees C 1hr
300 to 1000 degree C 1hr
1000 to 1450 degree C 3hr
1450-1530 degr Celcius holding time 2 hr
Natural cooling to 100 Degree C about 5 hours

Package included:
1 x OD98*12mm HT  Dental Zirconia Ceramic Blocks

Contact Information:
Live Support: Chat with us online
Email: service.alandental@gmail.com
If you have any problem, please do not hesitate to contact us.

Shipment Note:
If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address.

How to Buy from Alandental?