Tag Archives: machine

Dental Compressor

Paying Attention on Maintaining the Air Compressor

Maintenance of an air compressor unit is only part of what keeps a compressed air system in optimal condition throughout the four seasons of a given year. In order to keep a well–functioning compressor performing up to par, you also need to ensure that the compressor room is maintained with optimal working conditions for the machinery contained within.

As with the air and oil filters within the dental air compressor, it’s important to check the ventilation for the room that houses the machine. To prevent the ambient air from becoming too congested, perform the following steps on a routine basis:

Check air vents for dust deposits.
Clear away dust buildup from air vents.
Inspect the HVAC system for dust buildup and defects.

In any kind of work environment, the air needs to circulate in order to remain healthy. Even if you have an HVAC system in place that’s been especially programmed to maintain suitable temperatures and ambient air quality inside the room that stores your compressed air system, the HVAC unit itself could become compromised if not subject to periodic inspections. This, in turn, could degrade the quality of air within the compressor room and have a domino effect on the compressor and related tools. All such problems can be prevented with routine inspections of the air vents and HVAC system.

When water is the cooling factor in any kind of air system, the water itself must be cool in order for it to have the desired effect. When the weather gets warmer, the water that goes in should be even cooler. Just as with air coolers, a water–cooled air compressor needs sufficiently cool water to offset the ambient warmth during hotter months.

To ensure that the water in a water–cooled air compressor maintains sufficient coolness, perform the following actions before each working cycle that takes place during humid days:

Check the temperature of the water.
Adjust the water temperature if necessary when ambient temperatures rise.

With any machine that has been made to supply quality air, external factors can impact the performance of the machine and the quality of air that reaches the end point. In the case of a water–cooled air compressor, the quality of compressed air is liable to be compromised if a normally cold water supply is rendered warmer by humid ambient temperatures. To prevent such problems from occurring, check the water supply during hotter months to ensure that the water temperature remains consistent with fall, winter and spring levels.

dental equipment

Choosing Right X-ray Machine for Your Dental Practice

If you’re a dentist in 2016, you already know that investing in the right kind of digital image equipment is half the battle. In dentistry, there are two types of digital imaging systems used in intraoral radiography: computed radiography (CR) and direct radiography (DR). These are then categorized into periapical and panoramic x ray machines.

Dental radiography has evolved from film and chemical developers into a highly technical process that involves various types of dental x-ray machines, as well as powerful dental software programs to assist the dentist with image acquisition and diagnostic analysis of the acquired images. When making the decision to purchase x-ray equipment, the doctor needs to research the available options thoroughly, in order to make an informed choice for the “right” machine for his or her practice.

One type of portable dental x-ray is small, light, cordless and hand-held and can travel almost anywhere considering its compact size. This type of machine is an option for almost every patient, however, it’s especially useful for occasionally restless patients, such as young children, who require constant supervision and a quick x-ray. It can also be a better option to use in small spaces. The device works on battery so it’s important to have extras on hand in addition to a fully charged battery upon arrival regardless of where the patients are.

The other type of portable dental x-ray is one that uses a power cord and is slightly larger and heavier than the hand-held device; it’s also typically more durable. Each comes with a stand, which some dentists might find to be more comfortable and easier to use than a hand-held device. Some may also be able to operate as a hand-held device when using a stand isn’t necessary. This type is a good option for dentists who prefer to have the features of each type.

The first question that a doctor should ask themselves is, “What is the main type of treatment that I provide my patients?” If you are a general practitioner, a standard 2D panorex will provide all of the imaging requirements needed for such treatments as caries detection, diagnosis of TMJ issues, OPG images, and images of the patients entire detention in a single x-ray. Many of the newer 2D panoramic units also offer extraoral bitewing imaging capability, which allows the dentist to obtain a bitewing image without putting a sensor or periapical film inside of the patient’s mouth.

If the practice is concentrated in endodontic( Dental endo motor ) and implant treatment, then a CBCT machine is the most practical method of providing the doctor with diagnostic tools such as mandibular canal location, surgical guides, and pre-surgical treatment planning with the assistance of powerful 3D dental software applications. The patient is benefited by the reduced radiation exposure provided by these machines.