LY® Dental Portable Turbine Unit Work with Air Compressor (out of stock)

This product is a particularly good deal. It does not come with a hand piece only the two-port valve that connects to a two port hand piece. This was easy to purchase and when I did received the mandatory instructions on how to lube and cleanse the hand piece. I like the on-off water switch for low speed hand pieces, water and air piece (included), speed control with read-out, and the tube for the air compressor. The preparation was minimal all I needed was a 1/2” quick connect fitting with a 3/8” barb for the air supply hose, a anti-reverse valve for the air hose, a low speed hand piece, a straight piece for the low speed hand piece or an angle piece if you prefer, and a prophy angel for the straight piece or ,if you choose and angel piece, a prophy cup to pick-up and apply polish. It was easy to turn on. The pressure had to be set so the hand piece doesn’t spin to fast, I used 15bar on the read-out. The compressor I clipped at just under full pressure at 75lbs. To set the water and air hand piece by squirted it into the bath tub to see how far it shot and the degree of the arch. I decided it should be turned way down of a minimal arch. This was nice when I used it the splash effect was kept down. The air doesn’t have volume control on the water and air hand piece. It will only corresponds with the setting for the low speed hand piece. I say low speed hand piece because you shouldn’t need a high speed hand piece. I waisted money on one before I realized the diameter of the bur is smaller than a low speed hand piece with either angle prophy or the angle piece. The bur is 2.3mm diameter. Now that I have the proper hand piece, angel and cup there is no trouble using this machine! More hand piece information: the brand of my low speed motor is NSK, same with my straight piece that fits onto the motor, I use a disposable right angel prophy that fits onto the the straight piece the instructions on how to open the straight piece to accept the bur is included. All this cost me less than 300 dollars. Utube supplied me with information I did not have how to maneuver a prophy, burs, low speed hand piece options, and different types of prophy cups. This is a fun project that leads to a lot of success!

The title is VERY misleading, as the 'with air compressor' implies that a compressor is included. This is NOT the case. <br />
I have request that the with air compressor' be replaced with &quot;Needs Air Compressor to Run, but was told that this was not possible with eBay.<br />
<br />
Let the buyer beware! The compressor was going to be a few hundred dollars extra.